OEM Tools Parts Washer – Solvent Parts Cleaning Station
Our heavy-duty parts washer transforms how you clean automotive components, tools, and machinery parts in your shop. The generous 20-gallon solvent basin handles everything from engine blocks to transmission components, while the integrated recirculating pump delivers consistent cleaning power across the work surface.
Built for professional mechanics and serious DIY enthusiasts, this solvent parts cleaning station features a reinforced steel frame that withstands daily shop use. The adjustable work tray accommodates parts of varying sizes, and the flexible solvent hose lets you direct cleaning fluid exactly where you need it. We've included a removable filter basket that traps debris and extends solvent life, reducing your operating costs over time.
- 20-gallon solvent capacity for extended cleaning sessions
- Built-in recirculating pump with flexible hose for targeted cleaning
- Heavy-gauge steel construction with corrosion-resistant powder coating
- Adjustable work tray fits engine components and large parts
- Removable filter basket captures debris and extends solvent life
Construction & Durability
We engineered the OEM Tools parts washer with heavy-gauge steel throughout the frame and basin to handle the rigors of daily automotive work. The powder-coated finish resists chemicals, solvents, and rust, maintaining its appearance even in humid shop environments. The welded steel legs provide a stable platform that won’t wobble when you’re scrubbing heavy components.
The 20-gallon basin is formed from a single piece of steel to eliminate leak points, and the rounded corners make cleaning out sludge and sediment straightforward. We’ve reinforced the pump mounting area to prevent vibration fatigue, ensuring your cleaning station delivers reliable performance for years. The same attention to structural integrity you’ll find in our transmission jack designs carries through to every welded joint on this unit.
Pump System & Solvent Flow
The integrated recirculating pump moves solvent at 1.5 gallons per minute, providing enough flow to break down grease and oil without splashing. The flexible hose extends 24 inches from its connection point, letting you direct the cleaning stream onto specific component areas or hard-to-reach cavities.
Our pump housing mounts externally for easy access during maintenance, and the impeller design resists clogging from small debris particles. The system draws solvent through the removable filter basket before it reaches the pump, protecting the motor and extending service intervals. You can adjust the flow rate using the integrated valve, giving you precise control whether you’re rinsing delicate sensors or blasting carbon deposits from cylinder heads.
Work Tray & Parts Handling
The adjustable work tray features a perforated steel surface that allows solvent to drain back into the basin while providing a non-slip platform for your parts. We’ve designed the tray with multiple height positions so you can optimize the working angle for different component sizes. The 18″ × 18″ work area accommodates brake calipers, carburetors, differential covers, and most hand tools.
Raised edges on the tray contain splashing and prevent small parts like bolts and clips from falling into the basin. The tray lifts out completely for cleaning or when you need to submerge larger assemblies directly in the solvent. This versatility makes the parts washer equally useful for quick wipe-downs and deep cleaning sessions.
Complete Your Shop Equipment Setup
What people are saying
Parts Washer Questions & Answers
We recommend mineral spirits, kerosene, or commercially available parts washer solvents designed for recirculating systems. These solvents effectively dissolve grease and oil while maintaining safe flash points for shop use. Avoid gasoline or highly volatile solvents that create excessive fumes and fire hazards.
Most users find that mineral spirits offer the best balance of cleaning power, cost, and safety. The basin holds 15-20 gallons depending on your preferred working level, and properly filtered solvent typically lasts 4-6 weeks in regular use before requiring replacement.
Empty the removable filter basket weekly if you use the parts washer daily, or every 2-3 weeks for lighter use. The frequency depends on how much debris your parts carry and how dirty your solvent becomes. You'll notice the pump flow decreasing when the filter needs attention.
The basket itself doesn't require replacement under normal use. Simply lift it from the mounting clips, dispose of trapped debris, and rinse the mesh screen with clean solvent or water before reinstalling. This simple maintenance step significantly extends your solvent life and protects the recirculating pump.
The 20-gallon basin accommodates most automotive parts including cylinder heads, engine blocks (depending on size), transmission cases, differential covers, and brake assemblies. The 18" × 18" work tray handles components up to that dimension, and you can remove the tray entirely to submerge larger items directly in the solvent.
For extremely large or heavy components that exceed the basin capacity, you can use the flexible hose to direct solvent onto specific areas while the part rests on a separate stand. The 1.5 GPM pump flow provides enough pressure for effective cleaning even when you're not fully submerging the component.
Yes, we designed this solvent parts cleaning station for both professional automotive shops and serious home mechanics. The heavy-gauge steel construction and reinforced frame withstand daily use in multi-bay repair facilities. The powder-coated finish resists chemical damage and the welded construction eliminates weak points that fail under constant workload.
Many professional shops run these units continuously throughout the workday without performance issues. The externally mounted pump allows for easy maintenance access, and replacement parts are readily available should you need them after extended service.
The parts washer arrives partially assembled with the main frame and basin pre-welded as a single unit. You'll need to attach the legs, install the pump assembly, and mount the work tray, which typically takes 20-30 minutes using basic hand tools. We include all necessary hardware and detailed instructions.
The minimal assembly requirement ensures the critical components are properly aligned and welded at the factory while keeping shipping costs reasonable. Most users complete setup in under an hour including adding the initial solvent fill.
Used parts washer solvent is considered hazardous waste and must be disposed of according to local environmental regulations. Most areas have designated collection facilities or hazardous waste disposal services that accept used cleaning solvents. Never pour used solvent down drains or onto the ground.
The drain plug on the basin makes it easy to transfer used solvent into approved storage containers. Many automotive parts stores and service centers also accept used solvent for recycling. Check with your local waste management authority for specific disposal guidelines in your area.
The recirculating pump requires minimal maintenance when you keep the solvent filtered and free of large debris. Check the pump housing monthly for signs of leaking and ensure the mounting bolts remain tight. The external mounting design allows you to access the pump without draining the basin.
If pump flow decreases, first check and clean the filter basket, as restricted flow usually indicates debris buildup rather than pump failure. The impeller design resists clogging, but you can flush the pump by running clean solvent through it if you suspect blockage. Most pumps provide years of service with just basic filter maintenance and clean solvent.